How to Setup Belkin Range via IP Address?

If you want to eliminate the problems you are facing while accessing the Belkin Setup page, you can either use the IP address or search the Belkin setup guide. In this blog, you will learn how to access your Belkin Range Extender Setup. By performing some steps on the Belkin range setup, you can easily enhance the WiFi coverage and improve the performance of your wireless network.

System Requirement To Install Belkin Range WiFi Extender

  1. A Belkin WiFi Range Extender.
  2. A WiFi network and wireless router with its network name SSID and password. If you are using a dual-band router, be sure you have both SSIDs and passwords.
  3. Your personal computer with a web browser.
  4. Your wireless router should be 2.4GHz or 5GHz network bands with a broadband internet connection.
  5. Your computer system should consist of an installed wireless network interface card and TCP/IP protocol.
  6. Your computer must support at least Windows 7 with a 32/64 bit operating system.
  7. It is required that you are using internet explorer version 7 or above such as Google Chrome, Mozilla Firefox, or Safari.
  8. The minimum requirement of your system processor is 1.8GHz.
  9. Your computer system must support a minimum of 512MB RAM.

Steps For Belkin Range Setup

  1. The first and foremost step is to connect your range extender to a power outlet and make sure that it must lie within the range of your router’s wireless network.
  2. Then, connect the cable to the ethernet port of your computer.
  3. Open a web browser that you prefer to use while accessing the internet and visit the http Belkin range setup or you can also enter setup and hit enter to go further.
  4. Now, follow the on-screen instructions.
  5. Once the range extender is successfully connected to the wireless network, disconnect it from the computer and unplug the power supply.
  6. Thereafter, place your Belkin range extender in the area where you access your wireless network without facing any issues.

NOTE: Remember to place your Belkin extender where you are facing the dead zones or weak WiFi signals.

  1. After that, select the wireless network that you want to extend.
  2. Click on the Next button. With this, you can connect your new extended wireless network.
  3. Enter your wireless network password and press enter.
  4. Wait for the setup to access your password.
  5. At last, your Belkin range extender setup is now configured.

That’s all! By performing the above Belkin Range Setup steps you can easily install the Belkin WiFi extender. In case, if you need extra help, you can call our expert team.

#Belkin_Setup #Belkin_Range_Setup #Belkin_range #Belkin_Range_Extender_Setup