Making the Right Earring Fittings

A lot of people get their ears cut because of:
• They can’t find earrings that have non-pierced fittings.
• They find screw or clip fittings uncomfortable
• They find that pierced earrings are more secure.
• They prefer how it appears.
In the majority of cases, this works fairly well. Some use sleeping bags (when you’re not sporting earrings) to keep the holes from getting too big.

original site
my response
a fantastic read
my site
i thought about this
pop over to these guys
dig this

But, there are some who struggle by piercings.
• since the holes heal quick due to the speed at which they heal, because the holes heal so quickly,
• allergies are when they experience an allergic reaction or infection when they are in close contact with different metals or finishes
• are not able to use the majority of fittings that are pierced, as they can’t are difficult to find
• I don’t like ears with pierced holes
The fittings for earring earring
There’s a huge variety of ear fittings available that you can find all over the place, others are popular in certain regions, while others are found but aren’t always easy locate and some are as common as hen’s teeth!
Options for ears with pierced holes
• Fish Hook This is one piece that has an open loop on the front, with ball and coil. It then it curves in a ‘U shape, and a long, curved tail that runs in the back of your ear. There are variations: Shepherds Crook without the coil or ball, and Balian Hook (wonderful for dancing on) that has a bigger back wire. They’re comfortable as long as the wire isn’t overly thick and that the fall isn’t too heavy. Some models include a flattened section over the coil. These can be uncomfortable because of the weight is distributed at the top point of the curve, or insecure (badly designed weight-wise) - and need a butterfly/scroll/earnut to secure them.
• Ear Posts that come with the option of a scroll or butterfly. They are straight bars with a ball on the front, and typically an attached loop that is positioned under the ball. They are regarded by their advocates as more comfortable since they are made of thicker wire and load is distributed evenly over the inner earlobe. They also are more secure due to the butterfly.
• Kidney Safety Wires include an end loop on the front, as well as the hook is wrapped around the straight wire in the back. They are extremely secure, yet having the pressure point of the weight on high up on the wire.
• Earhoops (which pass across the back of the ear) These are loved by many, however they aren’t always easy or pleasant to thread if one end of the wire has sharp. In the case of earhoops in particular the ones with greater size like all the ‘big earrings, there’s the risk of clothing getting caught within them, as well as the ears being cut.

see it here
find this
read this article
click here now
browse this site
check here

More uncommon:
• Lever Back lever back features a loop on the front, with an attached lever. The whole is a big oval with the back descending to place it behind the ear. Not an easy task to get them in , very complicated, but a snug fit and much better than fishing hook.
• It is also known as the Creole The Creole smaller, heavier hoop. It has an open top loop that has hinges on one side , and a hollow or groove that it can be inserted into on the opposite end. It’s a difficult design in putting it on. but not as comfy as the Shepherds Crook, but secure in its place.
• It is also known as chain of the ear also known as Ear threads which can be described as fine chains or one with an u-shaped wire that is attached at the center of the chain or a u’-shaped wire connected to the other side of the chain. Each has straight wire threads connected to one end, and a loop attached to on the opposite end . They thread through the straight part and are anchored on the ‘u’ chain or wire in the ear and any drops that fall on the loop. The threading wire could also be pierced multiple times with beads hanging from the loop of chain. For balance , the beads or drops need to be light, so the ear chain feels pleasant, but it’s there is a little bit of effort to put in.

see here
this website
great post to read
my company
imp source
click to read more
find more info

Optional options for ears that aren’t perforated
For those who prefer fittings with no piercings, it is vital to ensure that the fitting is snug and secure. If you adjust the fitting correctly, you may even dance with these fittings!
• Earclips are connected at the base, with a loop in their front, and an angle at back. They are available in a variety of shapes and sizes. With loops There are small, light clips, clips that have tiny pressure points both the front and back and clips with a narrow pressure point on the front, and a large spread behind, as well as clips with big pressure points both in the front and back. The ease of use of all of these depends on the manufacturer, however the metal clips that are soft are able to be gently eased or adjusted with small pliers in order to achieve a more comfortable fitting. Metal clips made of hard material are great for those who are they are immediately comfortable, but can be a trouble (sometimes literally) to adjust if they are hard or difficult to adjust. If you can discuss this issue with your retailer, it might be possible to have the clips fixed. At our website designed for you we try to ensure that all clips are comfortable or adjusted for comfort. With no loop are clips that come with pads or claws that are suitable for stones or cabochons that can be attached to. They are available in various styles, from simple modern to Victoriana the former being the more common types that you can find. The above comments on the fit of these also apply to them.
• Ear screws are an ‘U shape fixed size the earlobe, which is widened, and then the screw is secured to an ear till a good fitting is achieved. Finding the perfect fit takes practice, but it is doable.
• Ear screws that have hinges are among the finest of ear fittings designed for ears with no holes. The hinge opens to allow the earring to be placed and then closed before being screwed back to the most comfortable fitting. The benefit of this type of fitting is that it allows you to remove the earrings from the hinge, it is then opened, and the comfy position will be maintained until the next time earrings will be worn. They are as simple to attach as clip and also have the benefit of adjustable fineness.
Earring fittings - What do they consist of?
A number of countries, and certainly all those that are part of the EU are obliged to adhere to the EU Nickel directive which bans nickel from entering into intimate body contact , which includes earrings that are pierced for the ears.
In the present, the earwires and fittings that are pierced or earwired constructed from gold or silver plating brass.
• Some of them are given an antique look.
• Some are coloured gunmetal , while others are antique copper.
For those who are struggling with earrings plated in brass, There are alternatives:
• Sterling Silver (92.5 percent Silver),
• Vermeil 24 carat gold, coated with Sterling Silver,
• 9 carats of Gold (37.5 percent Gold),
• Rolled Gold - gold and brass are pressed and rolled at high temperature,
• Surgical Steel is hypoallergenic,
• Titanium - for those who are not tolerant to metal fittings
These are available at a reasonable cost (some are available only in Shepherds Crook fittings).
More uncommon and at a higher cost:
• 18 carat Gold
• 24 carat Gold
• Pure Silver
are available in many countries. In some, there are gold-filled earwires available.
There’s usually less options for earring fittings that are not pierced.
Commonly , they include:
• Brass with silver and gold plated fittings
• Nickel fittings for ear (still in stock for ears with no piercings)
• Sterling silver ear screw are available for purchase - at an expense
• A 9-carat gold pair of ear screw are more expensive
• Sometimes, antique silver-plated or gold-plated brass may be located.