Process Automation
EMC has been the sole New Zealand representative for Endress+Hauser for over 45 years. Endress+Hauser is a global leader in measurement instrumentation, services and solutions for industrial process engineering. They provide process solutions for flow, level, pressure, analytics, temperature, recording and digital communications, optimising processes in terms of economic efficiency, safety and environmental impact. Our long relationship with E+H has ensured our customers have received the best ongoing support and reliable continuity of supply for several decades. Their complete product portfolio means we practically do not sell any other instrumentation brands which allows us to support the E+H range better and to focus on our core business of servicing our customers the best we can.
EMC is New Zealand’s largest manufacturer of Belt Weighers and Weighfeeders; something we’ve been proudly doing for almost 50 years. Our Weighing processors (Modweigh) are also developed and manufactured in NZ and not only supplied locally but also exported globally. In addition, we also supply tank and silo weighing systems with quality loadcells from Scaime and loadcell mounts from Thames Side and our own EMC range. We also provide on-site servicing and commissioning for all our Weighing products.
Endress+Hauser is not restricted by a limited number of measurement principles and can, therefore, offer the method best suited to your particular application in either liquids or bulk solids. We’ll carefully listen to your requirements and then offer the best suited and most cost-effective solution. We also offer onsite assistance with commissioning to ensure the instrument is installed correctly and performing as required. Continuous level measurement and point level detection in liquids and solids with capacitance probes.
Capacitance level measurement is a simple and cost-effective solution for level monitoring in liquids. Particularly in small tanks and build-up forming media. Point level detection works for both liquids including aggressive media, and solids with a heavy-build up the possibility. Contact us to learn more about the broad range of capacitance level sensors to suit your application. The principle of capacitance level measurement is based on the capacitance change of a capacitor. The probe and the tank wall form a capacitor whose capacitance is dependent on the amount of product in the tank. An empty tank has a lower capacitance in comparison to a full tank.
For more info: https://www.emc.co.nz/
Weigh feeder
EMC are New Zealand’s largest manufacturer of continuous (dynamic) weighing systems. We design and manufacture the ModWeigh range of world-class electronic weight indicators and processors and products such as belt weighers, weighfeeders and loadcell mounts for vessel and tank weighing systems. Our weighing products are found throughout many industries but predominantly in the primaries and food industries. When you choose our products, you can expect industry-leading features and high-quality manufacturing standards. Our team is also highly knowledgeable, so we will ensure you get the right solution for your requirements.
Because we manufacture and design our own products you not only get competitive pricing, we can also customise our weighing solutions to suit your exact requirements and offer unrivaled support. n order to get the most benefit from a load cell, a thorough understanding of the technology, construction and operation of this unique device is required. In addition, it is imperative that the correct load cell is selected for each application. With our experience, EMC can assist with load cell selection including the correct capacity, accuracy class, and environmental protection. Our comprehensive range includes aluminium, alloy steel, and stainless steel loadcells covering a wide measurement range up to 1000t. Our suppliers such as Scaime, Vishay, and Thames Side are amongst the foremost loadcell manufacturers in the world.
Weighing offers high accuracy and repeatability when measuring the contents of tanks, silos and other vessels. EMC’s Vessel Weighing products combine to provide simple and economical systems which are supported by EMC’s extensive experience, and essential specialist engineering advice to ensure a successful installation. Typical installations include the weighing and supporting of large milk powder and flour silos, vegetable oil tanks, small tanks for mixing and batching applications, hygienic and hazardous environments, etc.
The size and type of vessel, its support structures and pipe connections, movement during filling, environmental aspects, seismic restraints etc, are all factors that have to be considered in the design of a Vessel Weighing System, as they can have a significant impact on the accuracy and reliability. Loadcell Mounts provide a ready-made solution for tank and vessel weighing. In many applications, installation is simply a case of bolting the Mount between the floor and vessel leg, however, some installations require more engineering to ensure reliability and accuracy.
For more info: https://www.emc.co.nz/modweigh
Pressure instruments
EMC has been the sole New Zealand representative for Endress+Hauser for over 45 years. Endress+Hauser is a global leader in measurement instrumentation, services and solutions for industrial process engineering. They provide process solutions for flow, level, pressure, analytics, temperature, recording and digital communications, optimising processes in terms of economic efficiency, safety and environmental impact. Our long relationship with E+H has ensured our customers have received the best ongoing support and reliable continuity of supply for several decades. Their complete product portfolio means we practically do not sell any other instrumentation brands which allows us to support the E+H range better and to focus on our core business of servicing our customers the best we can.
EMC is New Zealand’s largest manufacturer of Belt Weighers and Weighfeeders; something we’ve been proudly doing for almost 50 years. Our Weighing processors (Modweigh) are also developed and manufactured in NZ and not only supplied locally but also exported globally. In addition, we also supply tank and silo weighing systems with quality loadcells from Scaime and loadcell mounts from Thames Side and our own EMC range. We also provide on-site servicing and commissioning for all our Weighing products.
Endress+Hauser is not restricted by a limited number of measurement principles and can, therefore, offer the method best suited to your particular application in either liquids or bulk solids. We’ll carefully listen to your requirements and then offer the best suited and most cost-effective solution. We also offer onsite assistance with commissioning to ensure the instrument is installed correctly and performing as required. Continuous level measurement and point level detection in liquids and solids with capacitance probes.
Capacitance level measurement is a simple and cost-effective solution for level monitoring in liquids. Particularly in small tanks and build-up forming media. Point level detection works for both liquids including aggressive media, and solids with a heavy-build up the possibility. Contact us to learn more about the broad range of capacitance level sensors to suit your application. The principle of capacitance level measurement is based on the capacitance change of a capacitor. The probe and the tank wall form a capacitor whose capacitance is dependent on the amount of product in the tank. An empty tank has a lower capacitance in comparison to a full tank.
For more info: https://www.emc.co.nz/
PLCs
Building new machines for today’s smart factories requires sophisticated control and automation that can only be delivered through multiple solutions and components – including a PLC, HMI, I/Os and motion components such as AC Servo systems and VFDs. As all components must be integrated, selecting the right combination is crucial to the efficiency and success of any project. At EMC we supply and support the Unitronics series of controllers which combine full-function PLCs and HMI operating panels into single compact units to provide one of the most economical control packages available.
Unitronics’ integrated solution for control and automation offers a better option. An easy way to avoid hassles, save time and be confident that everything will work together exactly as you need it to, while still enjoying a wide choice of components and configurations. Unitronics’ all-in-one approach means dealing with only one vendor – which translates into less research time, simplified ordering, coordinated delivery, and a single point of contact for support. There’s no legwork to find the source of a problem and no finger-pointing between vendors. We focus on providing high-performance PLCs while keeping our prices competitive. The options we supply are fully programmable and come with powerful HMI features including touch screen. You will also benefit from the state-of-the-art software that comes free with the PLCs we supply.
To speak to us about PLCs and your requirements please call us on +64 9 415 5110. Need a full-function control solution for a relatively simple application, but don’t want to compromise on the user interface or blow your budget? The Samba PLC+HMI from Unitronics could be the solution you need; this all-in-one Programmable Logic Controller has an integrated touchscreen, measuring 3.5, 4.3, or 7-inches, and onboard I/O in six possible configurations. The Samba offers features to compete with high-end PLCs, like a range of supported communication protocols, data logging and Trend capabilities, and a built-in alarm management system, but it’s priced more like a push-button or smart relay system. Since Unitronics provides programming software and technical support complimentary to all users, nothing beats the price to performance ratio of the Samba All-in-One PLC+HMI.
Endress+Hauser is not restricted by a limited number of measurement principles and can, therefore, offer the method best suited to your particular application in either liquids or bulk solids. We’ll carefully listen to your requirements and then offer the best suited and most cost-effective solution. We also offer onsite assistance with commissioning to ensure the instrument is installed correctly and performing as required.
For more info: https://www.emc.co.nz/products/plc/