Sign up for free to use this document yourself.
  • Structural Steel Fabricators in Auckland

    Do you need specialist engineering expertise to manufacture a part for your machines or equipment? Are you looking for aluminium, stainless steel, or structural steel fabricators in Auckland? Do you need CNC milling services, or do you need help from an expert welder?

    Manufacturing: Aluminium, Stainless Steel, and Structural Steel Fabrication in Auckland
    We can help with all these services and more at Otahuhu Engineering, so get in touch with us today. Our team of experienced and highly skilled engineers will get the job done.

    Our capabilities include CNC milling, turning, steel fabrication, aluminium welding, and more, with all of our services delivered in our Auckland workshop. It is fully equipped with all the necessary equipment to complete your project to the highest possible standards.

    For more info:- https://otahuhuengineering.co.nz/services/manufacturing/

  • Aluminium Welding in Auckland

    The aluminium welding Auckland process which provides a constant shielding gas and electrical power to the consumable solid electrode until it’s melt and weld the materials or joint with its deposits. The welding is a common welding practice but it does require specific techniques and, to some extent, experiences to perform it. However, there is always the first time for everything and it includes the welding work. If you’re new to welding, here are some tips for you when using Welders. The cleaning of materials is done before welding is a must in welding and it’s applied to all projects with no exception. It’s very important to rigidly clean and removes any stains or contaminants on the materials which can interfere with the welding process. Stains, rust, paint, oil, grease could disturb or even block the penetration of the welds. They also weaken the structure of the finished results and it could break anytime. That’s pre-cleaning is a crucial part of the welding process. Check the earth clamps in other hands, welding problems are driven by the earth clamps used while aluminium welding Auckland.

    A huge electrical circuit is generated when you’re welding and you should ensure there is no breaks or leaks to get the best performance. The earth clamps determine both safe and efficient welding. The contact points of earth clamp should free from stains or rust which may block the contacts. If it can’t be helped, then it’s suggested to invest quality earth clamps for a more reliable and better welding performance. You may consider the non-gas wire like the self-shielding flux core wire. It has a high deposition rate which delivers deep penetration and thick result. It doesn’t need gas shielding deals with contaminant well, so it can generate a clean result. If you’ve found this wire generating too much spatter, use safe anti-spatter products to get rid off after welding excesses.

    There is aluminium welding Auckland service available in the market. Unfortunately, some of them are not quality products which deliver very poor welding results. Their low prices are very tempting but they could be damaging as well. Instead, invest in quality welding wire which features decent copper coats as well as precise measurements. It would deliver an effective welding process and reliable, consistent results. Quality welding wires are available in competitive prices since more companies producing this product. Investing in the quality wire would improve the overall welding performance and result. Many welding issues like inaccuracy, sticking, or weak welds are mostly driven by contact tip quality. You might want to save the cost with cheap contact tips but it would make the wire unevenly, roughly go through the tips which generate overall erratic welding and waste of wires. At this point, it’s highly suggested to invest in quality tips to get the best welding results. Genuine parts would deliver even perfect aluminium welding Auckland results for sure.

    For more info:- https://otahuhuengineering.co.nz/services/manufacturing/

  • Fabrication in Auckland

    Our goal is to manufacture components, parts, and products to the highest standard of quality on every project we work on. In addition, we prioritise safety, ensuring all our working practices and outputs exceed national safety standards.

    You will find our team to be highly professional and reliable. We also have excellent design capabilities, so can help with your project even if the design is at the early stages. Our designers use the latest CAD and 3D modelling software.

    To get a free, no-obligation quote for your next project, please contact us today on 09 276 6473.

    For more info:- https://otahuhuengineering.co.nz/services/manufacturing/

  • Welders in Auckland

    We have state-of-the-art CNC milling machines at Otahuhu Engineering that are capable of milling a wide range of components and products. We have CNC turning machines too, plus we have the ability to complete horizontal boring work and much more.

    Our Standards of Customer Service
    We pride ourselves on the range and quality of metal fabrication, CNC milling, and welding services that we offer. Customer service is incredibly important to us too. In fact, many of the clients on our books are regular clients. They stay with us not just because they are happy with the workmanship we deliver, but also because of the service we offer.

    From your perspective, this means delivering according to your requirements, specifications, and deadline. Our prices are competitive too, so get in touch today.

    Our Manufacturing and Engineering Capabilities
    Fully equipped machine shop that includes large capacity lathes, horizontal boring, milling, and grinding capabilities
    CNC milling up to 1.5m x 0.5m x 0.7m high
    CNC turning
    Full fabrication facilities in steel, stainless steel, aluminium, and alloys
    Welding to AS/NZ 2980
    Welding on or off-site in MIG, TIG, and Arc

    For more info:- https://otahuhuengineering.co.nz/

{"cards":[{"_id":"4644724988c5fe8a69000015","treeId":"4644756488c5fe8a69000011","seq":21438487,"position":0.25,"parentId":null,"content":"**Structural Steel Fabricators in Auckland**\n\nDo you need specialist engineering expertise to manufacture a part for your machines or equipment? Are you looking for aluminium, stainless steel, or structural steel fabricators in Auckland? Do you need CNC milling services, or do you need help from an expert welder?\n\nManufacturing: Aluminium, Stainless Steel, and Structural Steel Fabrication in Auckland\nWe can help with all these services and more at Otahuhu Engineering, so get in touch with us today. Our team of experienced and highly skilled engineers will get the job done.\n\nOur capabilities include CNC milling, turning, steel fabrication, aluminium welding, and more, with all of our services delivered in our Auckland workshop. It is fully equipped with all the necessary equipment to complete your project to the highest possible standards.\n\nFor more info:- https://otahuhuengineering.co.nz/services/manufacturing/"},{"_id":"464470c888c5fe8a69000016","treeId":"4644756488c5fe8a69000011","seq":21438488,"position":0.375,"parentId":null,"content":"**Aluminium Welding in Auckland**\n\nThe aluminium welding Auckland process which provides a constant shielding gas and electrical power to the consumable solid electrode until it’s melt and weld the materials or joint with its deposits. The welding is a common welding practice but it does require specific techniques and, to some extent, experiences to perform it. However, there is always the first time for everything and it includes the welding work. If you’re new to welding, here are some tips for you when using Welders. The cleaning of materials is done before welding is a must in welding and it’s applied to all projects with no exception. It’s very important to rigidly clean and removes any stains or contaminants on the materials which can interfere with the welding process. Stains, rust, paint, oil, grease could disturb or even block the penetration of the welds. They also weaken the structure of the finished results and it could break anytime. That’s pre-cleaning is a crucial part of the welding process. Check the earth clamps in other hands, welding problems are driven by the earth clamps used while aluminium welding Auckland. \n\nA huge electrical circuit is generated when you’re welding and you should ensure there is no breaks or leaks to get the best performance. The earth clamps determine both safe and efficient welding. The contact points of earth clamp should free from stains or rust which may block the contacts. If it can’t be helped, then it’s suggested to invest quality earth clamps for a more reliable and better welding performance. You may consider the non-gas wire like the self-shielding flux core wire. It has a high deposition rate which delivers deep penetration and thick result. It doesn’t need gas shielding deals with contaminant well, so it can generate a clean result. If you’ve found this wire generating too much spatter, use safe anti-spatter products to get rid off after welding excesses. \n\nThere is aluminium welding Auckland service available in the market. Unfortunately, some of them are not quality products which deliver very poor welding results. Their low prices are very tempting but they could be damaging as well. Instead, invest in quality welding wire which features decent copper coats as well as precise measurements. It would deliver an effective welding process and reliable, consistent results. Quality welding wires are available in competitive prices since more companies producing this product. Investing in the quality wire would improve the overall welding performance and result. Many welding issues like inaccuracy, sticking, or weak welds are mostly driven by contact tip quality. You might want to save the cost with cheap contact tips but it would make the wire unevenly, roughly go through the tips which generate overall erratic welding and waste of wires. At this point, it’s highly suggested to invest in quality tips to get the best welding results. Genuine parts would deliver even perfect aluminium welding Auckland results for sure.\n\n\nFor more info:- https://otahuhuengineering.co.nz/services/manufacturing/\n \n"},{"_id":"464473a988c5fe8a69000014","treeId":"4644756488c5fe8a69000011","seq":21438485,"position":0.5,"parentId":null,"content":"**Fabrication in Auckland**\n\nOur goal is to manufacture components, parts, and products to the highest standard of quality on every project we work on. In addition, we prioritise safety, ensuring all our working practices and outputs exceed national safety standards.\n\nYou will find our team to be highly professional and reliable. We also have excellent design capabilities, so can help with your project even if the design is at the early stages. Our designers use the latest CAD and 3D modelling software.\n\nTo get a free, no-obligation quote for your next project, please contact us today on 09 276 6473.\n\nFor more info:- https://otahuhuengineering.co.nz/services/manufacturing/"},{"_id":"464474e088c5fe8a69000013","treeId":"4644756488c5fe8a69000011","seq":21438484,"position":1,"parentId":null,"content":"**Welders in Auckland**\n\nWe have state-of-the-art CNC milling machines at Otahuhu Engineering that are capable of milling a wide range of components and products. We have CNC turning machines too, plus we have the ability to complete horizontal boring work and much more.\n\nOur Standards of Customer Service\nWe pride ourselves on the range and quality of metal fabrication, CNC milling, and welding services that we offer. Customer service is incredibly important to us too. In fact, many of the clients on our books are regular clients. They stay with us not just because they are happy with the workmanship we deliver, but also because of the service we offer.\n\nFrom your perspective, this means delivering according to your requirements, specifications, and deadline. Our prices are competitive too, so get in touch today.\n\nOur Manufacturing and Engineering Capabilities\nFully equipped machine shop that includes large capacity lathes, horizontal boring, milling, and grinding capabilities\nCNC milling up to 1.5m x 0.5m x 0.7m high\nCNC turning\nFull fabrication facilities in steel, stainless steel, aluminium, and alloys\nWelding to AS/NZ 2980\nWelding on or off-site in MIG, TIG, and Arc\n\nFor more info:- https://otahuhuengineering.co.nz/"}],"tree":{"_id":"4644756488c5fe8a69000011","name":"otahuhuengineering","publicUrl":"otahuhuengineering"}}